MENUJulie FORD Custom | IMMO OFF Emulator
Custom-made Emulator that will be programmed specifically for your ECU in our lab!
Emulator designed specifically for Ford cars.
Attention:
This product requires sending the car's ECU to our lab.
Use:
1) Ford cars with immo module located inside the dashboard:
Supported ECUs:
Bosch EDC16
Siemens SID804
Siemens SID206
Siemens SIM210
Supported cars:
Ford Transit Connect 2005-2010
Ford Fiesta 2006-2009
Ford Fusion 2006-2009
Ford Focus 2004-2008
Attention:
The following requirements must be met:
- The car must be equipped with a mechanical key
OR
- You are changing only the ECU
2) Ford cars with immo module located in BCU:
(Can only be used for a project, e.g. installing the engine in a boat etc.)
Supported ECU:
Visteon DCU-10x (from Ford Transit)
3) Ford cars with ABS ID:
(Can only be used for a project, e.g. installing the engine in a boat, racing car etc.)
Supported cars:
Ford Galaxy 2007-2016
Ford Mondeo 2007-2016
Ford S-Max 2007-2016
Julie PRO | IMMO OFF & ESL/ELV Emulator
World's most popular car emulator!
All available CarLabImmo's solutions in one Emulator.
Supports CAN and K-Line transmission ECUs.
Contains solutions for repairing immobilisers and ESL/ELV!
NEW - Version 118
What's New:
1) New Program: BMW 5
The latest program is dedicated to BMW F-Series (CAN) and E-Series* (CAN) cars and can be used for the following purposes:
- Engine + EGS Swap (8HP Automatic Transmission Gearbox)
- Engine-only Swap
- EGS-only Swap
Additionally, the original car (donor) must meet the following requirements:
- It has to be equipped with one of the following modules: EWS4 / CAS / FEM
- The ISN in the ECU content needs to have 16 bytes
- The ISN in the EGS content needs to have 16 bytes (optional - only if your project requires it)
Attention:
The procedure WILL NOT WORK if the recipient vehicle is equipped with EWS4 / CAS / FEM module!
*Except BMW X3 (E83)
2) New Program: BMW 4
This program is dedicated to BMW E-Series (CAS-BUS) cars and can be used for the following purposes:
- Replacing a damaged ECU
Additionally, the car must meet the following requirements:
- It has to be equipped with one of the following modules: EWS4 / CAS / FEM
- The ISN in the ECU content needs to have 16 bytes
- The ISN in the EGS content needs to have 16 bytes (in case of Automatic Transmission)
Version 117
What's New:
1) New Program: Renault ISK Password
Function: Use Julie to read ECU values required to calculate ISK Password
2) ESL/ELV Signal Replacement: Mercedes W176, W204, C207, W212, W246 added!
3) ESL/ELV Signal Replacement: Mercedes W169 and W245 added!
4) New Program: PSA Automatic - A new, fully automatic procedure for PSA Group cars!
Functions:
- IMMO OFF with Julie Emulator
- Determine ECU PIN (for key coding or matching the ECU to the car)
Manual and full ECU list: Open Manual
Clixe FORD | IMMO OFF Emulator
Replace immobiliser in FORD
Works with Ford cars equipped with PATS module and a 4C key transponder
Also supports some Mazda models - more info in product description.
Fiat Bypass - Emergency Start Tool
Allows emergency start of the car - without original key.
Plug & Play OBD2 tool
- Fast procedure | Car is ready to start right after plugging in
- Intelligent ECU and car recognition
Works with popular 2007-2020 Alfa Romeo, Fiat models as well as selected Citroen, Ford, Iveco, Jeep, Lancia and Peugeot models.
Optional SGW Adapter now available!
Check product description for detailed list.
Fiat Bypass - SGW Adapter
Security Gateway Module (SGW) Adapter for Fiat Bypass - Emergency Start tool.
Unleash the full power of Fiat Bypass!
The 12+8pin SGW Adapter allows to bypass the Security Gateway Module (SGW) commonly found in Fiat Group vehicles since 2017.
When used together with Fiat Bypass, it enables the emergency start in models equipped with the SGW module.
Compatible with FCA Group diagnostics interfaces!
The SGW Adapter can also be used along with dedicated Fiat Group interfaces to perform diagnostics.