Julie PRO | IMMO OFF & ESL/ELV Emulator

World's most popular car emulator!
All available CarLabImmo's solutions in one Emulator.
Supports CAN and K-Line transmission ECUs.
Contains solutions for repairing immobilisers and ESL/ELV!
NEW - Version 118
What's New:
1) New Program: BMW 5
The latest program is dedicated to BMW F-Series (CAN) and E-Series* (CAN) cars and can be used for the following purposes:
- Engine + EGS Swap (8HP Automatic Transmission Gearbox)
- Engine-only Swap
- EGS-only Swap
Additionally, the original car (donor) must meet the following requirements:
- It has to be equipped with one of the following modules: EWS4 / CAS / FEM
- The ISN in the ECU content needs to have 16 bytes
- The ISN in the EGS content needs to have 16 bytes (optional - only if your project requires it)
Attention:
The procedure WILL NOT WORK if the recipient vehicle is equipped with EWS4 / CAS / FEM module!
*Except BMW X3 (E83)
2) New Program: BMW 4
This program is dedicated to BMW E-Series (CAS-BUS) cars and can be used for the following purposes:
- Replacing a damaged ECU
Additionally, the car must meet the following requirements:
- It has to be equipped with one of the following modules: EWS4 / CAS / FEM
- The ISN in the ECU content needs to have 16 bytes
- The ISN in the EGS content needs to have 16 bytes (in case of Automatic Transmission)
Version 117
What's New:
1) New Program: Renault ISK Password
Function: Use Julie to read ECU values required to calculate ISK Password
2) ESL/ELV Signal Replacement: Mercedes W176, W204, C207, W212, W246 added!
3) ESL/ELV Signal Replacement: Mercedes W169 and W245 added!
4) New Program: PSA Automatic - A new, fully automatic procedure for PSA Group cars!
Functions:
- IMMO OFF with Julie Emulator
- Determine ECU PIN (for key coding or matching the ECU to the car)
Manual and full ECU list: Open Manual
Julie LITE | IMMO OFF Emulator

All CarLabImmo's CAN transmission solutions in one Emulator!
Julie Lite supports ECUs with CAN transmission mounted in following car brands:
BMW | Fiat Group | VAG Group | PSA Group | Mercedes | Renault Group
Version 118
What's New:
1) New Program: BMW 5
The latest program is dedicated to BMW F-Series and E-Series* cars and can be used for the following purposes:
- Engine + EGS Swap (8HP Automatic Transmission Gearbox)
- Engine-only Swap
- EGS-only Swap
Additionally, the original car (donor) must meet the following requirements:
- It has to be equipped with one of the following modules: EWS4 / CAS / FEM
- The ISN in the ECU content needs to have 16 bytes
- The ISN in the EGS content needs to have 16 bytes (optional - only if your project requires it)
Attention:
The procedure WILL NOT WORK if the recipient vehicle is equipped with EWS4 / CAS / FEM module!
*Except BMW X3 (E83)
Version 117
1) New Program: Renault ISK Password
Supported Vehicles: Renault, Nissan, Dacia
Function: Use Julie to read ECU values required to calculate ISK Password
2) New Program: PSA Automatic - A new, fully automatic procedure for PSA Group cars!
Functions:
- IMMO OFF with Julie Emulator
- Determine ECU PIN (for key coding or matching the ECU to the car)
Manual and full ECU list: Open Manual
Julie VAG | IMMO OFF Emulator

Supported car brands:
Audi | Bentley | Bugatti | Lamborghini | Porsche | Seat | Skoda | Volkswagen
Supported ECUs:
All ECUs with WFS5 (5th-gen immo) / MQB Platform
The emulator gives authorisation to ECU and TCU at the same time!
Supported ECUs:
Continental Simos 18.1 | Immo 5th gen | MQB Platform*
Bosch EDC17 | Immo 5th gen | MQB Platform
Bosch MED17 | Immo 5th gen | MQB Platform
Bosch ME17 | Immo 5th gen | MQB Platform
Supported TCUs:
DQ200 | Immo 5th gen | MQB Platform
DQ250 | Immo 5th gen | MQB Platform
VL300 | Immo 5th gen | MQB Platform
VL381 | Immo 5th gen | MQB Platform
DL382 | Immo 5th gen | MQB Platform
DL501 | Immo 5th gen | MQB Platform
Tested on:
Continental Simos 18.1
Bosch EDC17CP44
Bosch EDC17CP20
Bosch ME17.5.24
* Read CS, MAC, POWER CLASS, VIN yourself! Available for FREE in Toolbox section of Immo Bypass!
Bosch ME17.1.6
Bosch MED17.5.5
Bosch MED9.5.10
Continental Simos PCR2.1
Siemens VDO PPD1.5
Siemens VDO PPD1.3
Siemens VDO PPD1.2
Siemens VDO PPD1.1
Get the Emulator installed in your ECU for FREE!
If you have one of the following ECU types, we can install the Emulator for you!
Purchase the Emulator and ship the ECU to us - our Team will install the Emulator in your ECU for FREE and ship it back to you!
Contact us before sending the ECU>
ECU Types eligible for Free Emulator Installation:
Magneti Marelli
Magneti Marelli 4VH
Manual and full ECU list: Open Manual
Clixe VAG 1 | IMMO OFF Emulator

Replace immobiliser signal in AUDI / SEAT / SKODA / VOLKSWAGEN
- Bosch EDC 1.3.3 (MSA 12-4.1)
- Bosch M 5.4
- Bosch M 3.8.4
- Bosch MA 1.3
- Bosch MP 9.0
- Hella MPFI
- Magneti Marelli IAW4AV.x
- Magneti Marelli IAW4CV.x
- Magneti Marelli IAW4LV.x
- Magneti Marelli IAW4MV.x
- Magneti Marelli IAW1AV
- Siemens 5WP4457
- Siemens 5WP4 340
- Siemens 5WP4 182
- Siemens 5WP4 167
- Siemens 5WP4 154
- Temic 044 906 024 E
- 1.9 Diesel
Clixe VAG FUEL SHUT-OFF VALVE | IMMO OFF Emulator

Replace immobiliser signal in AUDI / SEAT / SKODA / VOLKSWAGEN
- Diesel vehicles with immo box - without ECU
(Unlocks N109 Fuel Shut-Off Valve on injection pump)
Clixe VAG HITACHI | IMMO OFF Emulator

Replace immobiliser signal in AUDI / SEAT / SKODA / VOLKSWAGEN
- Hitachi MMS-314
- Hitachi MMS-341
Bypass Gold

Automatically remove immo through OBD2 plug in VAG group cars:
AUDI, SEAT, SKODA, VOLKSWAGEN
You can use it in following ECUs:
- BOSCH EDC16
- BOSCH EDC15 (Except Audi vehicles with coded injection pump)
- BOSCH ME7