Julie FORD | IMMO OFF Emulator

Use:
1) Ford cars with immo module located inside the dashboard:
Supported ECUs:
Siemens VDO SID803/803A
Siemens SID206
Siemens SID202
Attention:
The following requirements must be met:
- The car must be equipped with a mechanical key
OR
- You are changing only the ECU
2) Original car's ECU (donor) must be equipped with immo module located in BCU
(Can only be used for a project, e.g. installing the engine in a boat etc.)
Supported ECU:
Visteon DCU-101
Donor car:
Ford Transit
3) Original car's ECU (donor) must be equipped with ABS ID and immo module located in BCU
(Can only be used for a project, e.g. installing the engine in a boat, racing car etc.)
Donor cars:
Ford Galaxy 2007-2016
Ford Mondeo 2007-2016
Ford S-Max 2007-2016
Availability: In Stock
Julie FORD Custom | IMMO OFF Emulator

Custom-made Emulator that will be programmed specifically for your ECU in our lab!
Emulator designed specifically for Ford cars.
Attention:
This product requires sending the car's ECU to our lab.
Use:
1) Ford cars with immo module located inside the dashboard:
Supported ECUs:
Bosch EDC16
Siemens SID804
Siemens SIM210
Supported cars:
Ford Transit Connect 2005-2010
Ford Fiesta 2006-2009
Ford Fusion 2006-2009
Ford Focus 2004-2008
Attention:
The following requirements must be met:
- The car must be equipped with a mechanical key
OR
- You are changing only the ECU
2) Original car's ECU (donor) must be equipped with immo module located in BCU
(Can only be used for a project, e.g. installing the engine in a boat etc.)
Supported ECU:
Visteon DCU-10x
Donor car:
Ford Transit
Availability: In Stock
Julie PRO | IMMO OFF & ESL/ELV Emulator

World's most popular car emulator!
All available CarLabImmo's solutions in one Emulator.
Supports CAN and K-Line transmission ECUs.
Contains solutions for repairing immobilisers and ESL/ELV!
NEW - Version 119
What's New:
1) New Program: Ford CAN 1
Use: Ford cars with immo module located inside the dashboard
Supported ECUs: Siemens SID803/803A, SID206, SID202
2) New Program: Ford CAN 2
Use: Original car's ECU (donor) must be equipped with immo module located in BCU
Supported ECUs: Visteon DCU-101
Donor car: Ford Transit
Attention: Can only be used for a custom project, e.g. installing the engine in a boat, racing car etc.
3) New Program: Ford CAN 3
Use: Original car's ECU (donor) must be equipped with ABS ID + immo module located in BCU
Donor cars: Ford Galaxy 2007-2016, Ford Mondeo 2007-2016, Ford S-Max 2007-2016
Attention: Can only be used for a custom project, e.g. installing the engine in a boat, racing car etc.
4) New Program: Volvo SCL 2
Use: SCL / ESL Signal Replacement
Supported models: C30, S40 II, V50, C70 II
5) New Program: Volvo SCL 3
Use: SCL / ESL Signal Replacement
Supported models: S90, V90, XC60 II, XC90 II
Version 118
What's New:
1) New Program: BMW 5
The latest program is dedicated to BMW F-Series (CAN) and E-Series* (CAN) cars and can be used for the following purposes:
- Engine + EGS Swap (8HP Automatic Transmission Gearbox)
- Engine-only Swap
- EGS-only Swap
*Except BMW X3 (E83)
2) New Program: BMW 4
This program is dedicated to BMW E-Series (CAS-BUS) cars and can be used for the following purposes:
- Replacing a damaged ECU
Manual and full ECU list: Open Manual
Availability: In Stock
Julie LITE | IMMO OFF Emulator

All CarLabImmo's CAN transmission solutions in one Emulator!
Julie Lite supports ECUs with CAN transmission mounted in following car brands:
BMW | Ford | Fiat Group | VAG Group | PSA Group | Mercedes | Renault Group | Volvo
NEW - Version 119
What's New:
1) New Program: Ford CAN 1
Use: Ford cars with immo module located inside the dashboard
Supported ECUs: Siemens SID803/803A, SID206, SID202
2) New Program: Ford CAN 2
Use: Original car's ECU (donor) must be equipped with immo module located in BCU
Supported ECUs: Visteon DCU-101
Donor car: Ford Transit
Attention: Can only be used for a custom project, e.g. installing the engine in a boat, racing car etc.
3) New Program: Ford CAN 3
Use: Original car's ECU (donor) must be equipped with ABS ID + immo module located in BCU
Donor cars: Ford Galaxy 2007-2016, Ford Mondeo 2007-2016, Ford S-Max 2007-2016
Attention: Can only be used for a custom project, e.g. installing the engine in a boat, racing car etc.
4) New Program: Volvo SCL 3
Use: SCL / ESL Signal Replacement
Supported models: S90, V90, XC60 II, XC90 II
Version 118
What's New:
1) New Program: BMW 5
The latest program is dedicated to BMW F-Series and E-Series* cars and can be used for the following purposes:
- Engine + EGS Swap (8HP Automatic Transmission Gearbox)
- Engine-only Swap
- EGS-only Swap
*Except BMW X3 (E83)
Manual and full ECU list: Open Manual
Availability: In Stock
Clixe FORD | IMMO OFF Emulator

Replace immobiliser in FORD
Works with Ford cars equipped with PATS module and a 4C key transponder
Also supports some Mazda models - more info in product description.
Availability: Check Alternative Emulator - Julie PRO
Fiat Bypass - Emergency Start Tool

Allows emergency start of the car - without original key.
Plug & Play OBD2 tool
- Fast procedure | Car is ready to start right after plugging in
- Intelligent ECU and car recognition
Works with popular 2007-2020 Alfa Romeo, Fiat models as well as selected Citroen, Ford, Iveco, Jeep, Lancia and Peugeot models.
Optional SGW Adapter now available!
Check product description for detailed list.
Availability: In Stock
Fiat Bypass - SGW Adapter

Security Gateway Module (SGW) Adapter for Fiat Bypass - Emergency Start tool.
Unleash the full power of Fiat Bypass!
The 12+8pin SGW Adapter allows to bypass the Security Gateway Module (SGW) commonly found in Fiat Group vehicles since 2017.
When used together with Fiat Bypass, it enables the emergency start in models equipped with the SGW module.
Compatible with FCA Group diagnostics interfaces!
The SGW Adapter can also be used along with dedicated Fiat Group interfaces to perform diagnostics.
Availability: In Stock