Julie PRO | IMMO OFF & ESL/ELV Emulator

World's most popular car emulator!
All available CarLabImmo's solutions in one Emulator.
Supports CAN and K-Line transmission ECUs.
Contains solutions for repairing immobilisers and ESL/ELV!
NEW - Version 119
What's New:
1) New Program: Ford CAN 1
Use: Ford cars with immo module located inside the dashboard
Supported ECUs: Siemens SID803/803A, SID206, SID202
2) New Program: Ford CAN 2
Use: Original car's ECU (donor) must be equipped with immo module located in BCU
Supported ECUs: Visteon DCU-101
Donor car: Ford Transit
Attention: Can only be used for a custom project, e.g. installing the engine in a boat, racing car etc.
3) New Program: Ford CAN 3
Use: Original car's ECU (donor) must be equipped with ABS ID + immo module located in BCU
Donor cars: Ford Galaxy 2007-2016, Ford Mondeo 2007-2016, Ford S-Max 2007-2016
Attention: Can only be used for a custom project, e.g. installing the engine in a boat, racing car etc.
4) New Program: Volvo SCL 2
Use: SCL / ESL Signal Replacement
Supported models: C30, S40 II, V50, C70 II
5) New Program: Volvo SCL 3
Use: SCL / ESL Signal Replacement
Supported models: S90, V90, XC60 II, XC90 II
Version 118
What's New:
1) New Program: BMW 5
The latest program is dedicated to BMW F-Series (CAN) and E-Series* (CAN) cars and can be used for the following purposes:
- Engine + EGS Swap (8HP Automatic Transmission Gearbox)
- Engine-only Swap
- EGS-only Swap
*Except BMW X3 (E83)
2) New Program: BMW 4
This program is dedicated to BMW E-Series (CAS-BUS) cars and can be used for the following purposes:
- Replacing a damaged ECU
Manual and full ECU list: Open Manual
Availability: In Stock
Julie LITE | IMMO OFF Emulator

All CarLabImmo's CAN transmission solutions in one Emulator!
Julie Lite supports ECUs with CAN transmission mounted in following car brands:
BMW | Ford | Fiat Group | VAG Group | PSA Group | Mercedes | Renault Group | Volvo
NEW - Version 119
What's New:
1) New Program: Ford CAN 1
Use: Ford cars with immo module located inside the dashboard
Supported ECUs: Siemens SID803/803A, SID206, SID202
2) New Program: Ford CAN 2
Use: Original car's ECU (donor) must be equipped with immo module located in BCU
Supported ECUs: Visteon DCU-101
Donor car: Ford Transit
Attention: Can only be used for a custom project, e.g. installing the engine in a boat, racing car etc.
3) New Program: Ford CAN 3
Use: Original car's ECU (donor) must be equipped with ABS ID + immo module located in BCU
Donor cars: Ford Galaxy 2007-2016, Ford Mondeo 2007-2016, Ford S-Max 2007-2016
Attention: Can only be used for a custom project, e.g. installing the engine in a boat, racing car etc.
4) New Program: Volvo SCL 3
Use: SCL / ESL Signal Replacement
Supported models: S90, V90, XC60 II, XC90 II
Version 118
What's New:
1) New Program: BMW 5
The latest program is dedicated to BMW F-Series and E-Series* cars and can be used for the following purposes:
- Engine + EGS Swap (8HP Automatic Transmission Gearbox)
- Engine-only Swap
- EGS-only Swap
*Except BMW X3 (E83)
Manual and full ECU list: Open Manual
Availability: In Stock
Julie VAG | IMMO OFF Emulator

Supported car brands:
Audi | Bentley | Bugatti | Lamborghini | Porsche | Seat | Skoda | Volkswagen
Supported ECUs:
All ECUs with WFS5 (5th-gen immo) / MQB Platform
The emulator gives authorisation to ECU and TCU at the same time!
Supported ECUs:
Continental Simos 18.1 | Immo 5th gen | MQB Platform*
Bosch EDC17 | Immo 5th gen | MQB Platform
Bosch MED17 | Immo 5th gen | MQB Platform
Bosch ME17 | Immo 5th gen | MQB Platform
Supported TCUs:
DQ200 | Immo 5th gen | MQB Platform
DQ250 | Immo 5th gen | MQB Platform
VL300 | Immo 5th gen | MQB Platform
VL381 | Immo 5th gen | MQB Platform
DL382 | Immo 5th gen | MQB Platform
DL501 | Immo 5th gen | MQB Platform
Tested on:
Continental Simos 18.1
Bosch EDC17CP44
Bosch EDC17CP20
Bosch ME17.5.24
* Read CS, MAC, POWER CLASS, VIN yourself! Available for FREE in Toolbox section of Immo Bypass!
Bosch ME17.1.6
Bosch MED17.5.5
Bosch MED9.5.10
Continental Simos PCR2.1
Siemens VDO PPD1.5
Siemens VDO PPD1.3
Siemens VDO PPD1.2
Siemens VDO PPD1.1
Get the Emulator installed in your ECU for FREE!
If you have one of the following ECU types, we can install the Emulator for you!
Purchase the Emulator and ship the ECU to us - our Team will install the Emulator in your ECU for FREE and ship it back to you!
Contact us before sending the ECU>
ECU Types eligible for Free Emulator Installation:
Magneti Marelli
Magneti Marelli 4VH
Manual and full ECU list: Open Manual
Availability: In Stock
Clixe VAG 1 | IMMO OFF Emulator

Replace immobiliser signal in AUDI / SEAT / SKODA / VOLKSWAGEN
- Bosch EDC 1.3.3 (MSA 12-4.1)
- Bosch M 5.4
- Bosch M 3.8.4
- Bosch MA 1.3
- Bosch MP 9.0
- Hella MPFI
- Magneti Marelli IAW4AV.x
- Magneti Marelli IAW4CV.x
- Magneti Marelli IAW4LV.x
- Magneti Marelli IAW4MV.x
- Magneti Marelli IAW1AV
- Siemens 5WP4457
- Siemens 5WP4 340
- Siemens 5WP4 182
- Siemens 5WP4 167
- Siemens 5WP4 154
- Temic 044 906 024 E
- 1.9 Diesel
Availability: Check Alternative Emulator - Julie PRO
Clixe VAG FUEL SHUT-OFF VALVE | IMMO OFF Emulator

Replace immobiliser signal in AUDI / SEAT / SKODA / VOLKSWAGEN
- Diesel vehicles with immo box - without ECU
(Unlocks N109 Fuel Shut-Off Valve on injection pump)
Availability: Check Alternative Emulator - Julie PRO
Clixe VAG HITACHI | IMMO OFF Emulator

Replace immobiliser signal in AUDI / SEAT / SKODA / VOLKSWAGEN
- Hitachi MMS-314
- Hitachi MMS-341
Availability: Check Alternative Emulator - Julie PRO
Bypass Gold

Automatically remove immo through OBD2 plug in VAG group cars:
AUDI, SEAT, SKODA, VOLKSWAGEN
You can use it in following ECUs:
- BOSCH EDC16
- BOSCH EDC15 (Except Audi vehicles with coded injection pump)
- BOSCH ME7
Availability: In Stock